Wonderful case, all in one of them

Zhengzhou Autol Technology Co., Ltd. is a research and development, production, sales and service as one of the innovative high-tech enterprises...

Autol Waste Grease Collection System in Jiangsu Guohua

Release Time:

2022-04-06


Autol Waste Grease Collection System in Jiangsu Guohua

  Name of Owner: Guohuan Energy

  Manufacturer of main machine: Shanghai Electric

  Equipment model: 2.0MW wind turbine

  Installed on: Pitch bearings

  Model installed: ALP702W

  Brief Introduction:

  Autol's after-service engineer found that, during this inspection period, the monitor counter displayed for 480 times. Up to now, the machine has operated for about 480 cycles. It has 30 grease suction and discharge units. The system was manually operated for 5 cycles. ALP702W powered pump, branch control box, grease suction and discharge units, etc. were normally operating. As a result, 15 grease collectors collected 170 ml waste grease and the collector is 500 ml in vehicle. 6 of them close to nacelle side collected 250 ml waste grease. Because of main bearing designed with a 5° elevation angle and under action of hub rotating centrifugal force, the collector at the deflector collected about 100 ml. Generally, the waste grease collection was satisfied. For the parameters setting, the off time was 1P:6h,the operating time of supply line A was 2P:3min and the operating time of supply line B was 3P:3min.